SPECIAL INSPECTIONS & OTHER SERVICES
| "Let's Build on a Stable Foundation" |
Building materials and construction methods are subject to stringent inspection
in order to comply with New York State’s Building Codes. These codes govern
the workmanship, quality and requirements for the materials covered.
You can count on PW LABORATORIES, INC. to provide continuous and periodic
observation of work requiring special inspection.
Projects worked on: Turning Stone Resort & Casino, Syracuse University Life
Science Building, Destiny USA and the Wingate Hotel to name a few.
Special Inspections
Other Services
Steel Testing
in order to comply with New York State’s Building Codes. These codes govern
the workmanship, quality and requirements for the materials covered.
You can count on PW LABORATORIES, INC. to provide continuous and periodic
observation of work requiring special inspection.
Projects worked on: Turning Stone Resort & Casino, Syracuse University Life
Science Building, Destiny USA and the Wingate Hotel to name a few.
Special Inspections
- Geotechnical
- Concrete
- Sprayed on Fire Resistive Material
- Reinforcing Steel
- Masonry
- Structural Steel
Other Services
- Intumescent Paint Thickness Inspection
- Elastomeric Waterproofing Inspection
- Storm Water Pollution Prevention Monitoring (SWPP)
Steel Testing
- Plant or Field Inspector
- Skidmore-Wilhelm Tension Calibration Device
- Structural Steel Liquid Dye Penetrant Test
- Laboratory Determination of the Mechanical Properties of Externally &
Internally Threaded Fasteners & Washers
Structural Steel – All CWI inspection will be performed by Davis Inspection
Services, Inc.
Inspectors are certified for ASNT Levels II and III.
This laboratory is in general conformance with ASTM C1077, D3740 and E329
with the exception of the requirement for a full time staff professional engineer.
However, John P. Stopen Engineering Partnership is closely associated with
PW Laboratories, Inc. and will review documents and practices as required.
PW Laboratories, Inc.’s laboratory is currently under direction of a NICET
Senior Engineering Technician-Certified Level IV in the Construction Materials
Testing Subfields of Concrete, Soils and Bituminous Materials.
Test Methods are performed in accordance with ASTM Standards, AASHTO,
FAA, NYSDOT, Penn Dot, and Corps of Engineers as applicable.
Services, Inc.
Inspectors are certified for ASNT Levels II and III.
This laboratory is in general conformance with ASTM C1077, D3740 and E329
with the exception of the requirement for a full time staff professional engineer.
However, John P. Stopen Engineering Partnership is closely associated with
PW Laboratories, Inc. and will review documents and practices as required.
PW Laboratories, Inc.’s laboratory is currently under direction of a NICET
Senior Engineering Technician-Certified Level IV in the Construction Materials
Testing Subfields of Concrete, Soils and Bituminous Materials.
Test Methods are performed in accordance with ASTM Standards, AASHTO,
FAA, NYSDOT, Penn Dot, and Corps of Engineers as applicable.
| PW Laboratories, Inc. specializes in Construction Materials Inspection & Testing |
 | |  | |  | |  |
PW LABORATORIES, INC.
6544 FREMONT ROAD, EAST SYRACUSE, NY 13057
315-437-1420 - Fax 315-503-3058 -